Plastering Your Walls Home DIY Project
Gypsum is a very useful material on the walls, if you’ve recently decided to give a new look to your home or a flood or fire was moderate, with plaster to bring home in a style declaration. Old houses are built with bricks and then canceled when a flood or fire is very important to remove the voices, usually remove most of the votes to 1 m above the ground, because it may have had with the Method acting a heavy hammer and chisel, or you can use the power of speed, you can remove Kango DIY project, they must be expensive, but can be rented. The Kango is like a chisel vibration is very powerful and they may even be entirely solid concrete easily destroyed if you need to use Kango note you choose, you may use a chisel to certain regions of the space, for example, about caps and tubes, this tool can rip on them and they live to be electrocuted.
Removing the old plaster, make sure you do like the bricks or blocks and make it as easy as you can be a good method if the Kango used to take a Stanley knife and draw a line about a certain level and then view the Kango down to the end, turn to press down and you can get the votes, as far as possible. If any patch is removed, you’re ready to plaster walls, unless such damage as floods where the house should be added to dry, then seek advice from authorities if you’re ready. The most commonly used, gypsum and plaster is in two layers, using the first layer is thick, about 10 mm and the second layer is about 3 mm thick. The first thing you should do is a mixture of the troops are ready, the best use of plaster do it yourself because it will not end when the practice of professional voice, when the project is to better yourself is get the bags large trays rather than on measures that use a lot.
With the stock you just mix water with the pasta according to manufacturer’s instructions. Once you have your voice, which is the first on the palette and mixed on the palette, then apply the plaster on the wall after making the profession in the top layer of new plaster readily join the cast below. Once done, apply the patch in the top layer of repair, this layer must be maintained to safely use a spare piece of scrap wood for the excess plaster on the walls. An easier solution is with plasterboard, but this does not mean the same feeling of satisfaction, as do the voices themselves.